The ride-on mowing machine for all seasons and all terrains, with extra power and performance.
FEATURES
- Iseki 3 cylinder, clean burn, liquid cooled, 22ehp, 1123cc diesel engine with 18.5 litre fuel tank.
- 2-pedal hydrostatic transmission system
- 2WD with differential lock
- Hydrostatic power steering
- Handbrake & road lighting harness
- Turf tyre sizes Front:210x60D-8 Rear:250x60D-14
OPTIONS AVAILABLE :
- Available with 48" or 54" rear discharge deck with high dump or low dump collector
|
ACCESSORIES AVAILABLE (For SXG 22 RH Series)
| SCMA54SXG22E4 | 54" deck for SXG |
| SCMA48SXG22E4 | 48" deck for SXG |
| SMM54SXG22E4 | 54" Mulching Deck for SXG 22(Mulching blades req) |
| IE01-306-211-00 | Mulching Blade (Main blade for Iseki SMM54 type decks) 3 per deck |
| IE01-306-212-00 | Mulching Blade (Sub blade for Iseki SMM54 type decks ) 3 per deck |
| 8664-705-200-00 | Conversion kit for SXG low dump collectors to rear discharge |
| 8664-755-200-00 | Conversion kit for SXG high dump collectors to rear discharge |
IWCK061 |
Long hitch for SXG fitted with collectors |
| IWCK062 | Short hitch for SXG without a collector fitted |
| SBC550XLE4 | Low dump collector |
SBC550XHE4 |
High dump collector |
1728-660-240-00 |
Road lighting kit for SXG (Road Homologated) low dump collector |
1728-660-500-00 |
Road lighting kit for SXG (Road Homologated) high dump collector |
| 4137166 | Deflector kit for SXG without collectors |
| IWCK078 | ROPS Frame with seat belt |
| IWCK070 | 1.20M (47") Snow blade for SXG inc. hyd. front lift 'A' frame & piping |
| IWCK071 | Hyd. kit for side angling snow blade or brush with a low dump collector |
| IWCK072 | Hyd. kit for side angling snow blade or brush with a high dump collector |
| IWCK073 | Front brush SXG with hydraulic lift 'A' frame & piping |
| IWCK074 | Broadcaster AKS for SXG, 80cm working width, hyd.drive incl mtg kit |
| 1620-410-001-10 | Weight frame (holds 6 x 25kg weights) |
| IWCK011 | (1) 25KG weight |
| 30.9630 | Front hydraulic lift 'A' frame (req hyd valve to operate) |
| 30.791 | Snow Thrower SF117 working width 1.17m, intake drum diameter,40cm, inc PTO shaft (req fron linkage 'A' frame & front PTO installed |